踢踏板车

从理论上讲，这是非常基本的。虽然我只是一名法律系学生，绝不是任何类型的工程师。我的想法是创造一个底部和侧面有网格状裂缝的特百惠。此外，盖子下面会有裂缝。有了网格状的缝隙，人们就可以把插入物放在里面，以便把食物分开。随着插入物进入底部，侧面和盖子，将有一个很好的密封从任何液体或食物与其他混合。显然，网格的关键是能够创建不同大小的服务，并调整它们的弹跳。基本上，一个人可以放一杯完美的米饭，另一个放蔬菜等等。目前市场上的保鲜特百惠不允许这样做，一个人必须买上千个。我希望它能长10英寸，长5英寸，高2.5英寸左右。 The top of the tupperware and lid should look similar to your standard rubbermaid tupperware. the walls of the tupperware should not be less or more than 90 degrees. The corners and need to be rounded. The slits them selves should not be to shallow, for that would defeat the purpose of them. My estimation is that they would be about .5 centimeters. Because of the slits, the bottom and sides could/maybe/should form a ridge like surface. (think of ruffles) Lastly, the ridges, or slits should be continuous, at least in my mind around the entirety of the tupperware, which means the lid will need to account for vertical ridges along the walls of the tupperware and still be able to seal it. Although I will not prepay, being the cautious man of law that I am, payment will be given upon the winner being chosen. AND, in the event that my price is significantly low balled and outrageous I will increase it if no one in their right mind would accept it. Thank you.

四层木框架联排别墅式开发，下面有停车场。62 x 250，跨度超过车库14英尺，最大19。楼板托梁工程LBL梁，外部石材，有外部渲染和立面开始。室内布局已经达到95%。

350毫米以下可折叠、模块化臂、电池组和有效载荷不可知安装点UAV。框架设计需要考虑现场组装所需的最少或不需要工具。如果需要工具，紧固件等必须围绕常规多工具的能力。设计还应在零照明环境下接近2分钟的现场组装。设计应基于增材制造能力，碳纤维作为生产的首选材料。

我们有兴趣雇用有经验或有能力为鞋类和鞋类相关项目创建CAD的人。

-沙发设计的重塑-效果图- CAD/技术图纸- 3D -产品设计师我会发送模型。