帮助设计一架电动飞机!!盲目的

帮助设计通用工业资产保护系统的创意概念，该系统由(1)传感器单元，(2)报警HUB和(3)自动控制单元组成。总体概念是拥有一个改造系统，该系统可以(1)感知危险，(2)提醒操作人员，(3)能够发出自动响应，以确保在工业环境中保护操作人员和资产。部件说明:1.安装。传感器:应该很小(大约5 × 5厘米)薄，包含太阳能电池板，电子元件，并且足够耐用，可以承受敲打。它们将被放置在车辆外部或工业厂房周围。结构应该类似于防弹玻璃，既要耐用，又要透明，以便太阳能电池板发挥作用。请选择运动设计，同时保持可制造性。请稍微关注传感器安装选项，例如:传感器可以连接到一个漂亮的底板，并且可能很容易拆卸更换。对这些规格之外的创意设计开放。2. Alarm HUB: Combine the following into one product: “Emergency Hazard Warning Beacon” + “Google Nest Thermostat” + “Wifi Router” + “DJI Mavic Air 2 Controller.” If that doesn’t make sense, read on. The Alarm HUB will connect to the sensors and provide visible and audible warning if any dangers are detected. Target dimensions should be relatively small around 15x15x4cm, but still be visible as a warning light in an industrial setting. First it should resemble an Emergency Hazard Warning Beacon similar to an emergency light bar on a police car or fire-truck. Secondly it should be aesthetic like a fancy like the Google Nest thermostat, or a wifi-router or something of this sort as it will be placed in multiple places like on the dash of a car, on the exterior of the car, mounted near the control systems for a industrial plant, or mounted vertically on the industrial plant wall next to some equipment. It should include a simple interface with a few buttons and a small LCD screen. Thirdly, most importantly the alarm HUB MUST have a built-in clamp for holding a smart-phone as the system will be enabled for use with phones or tablets to act as the screen. Use the DJI Mavic Air 2 controller for design inspiration for the phone holder clamp. Additionally the phone holder clamp should be able to accept a tablet-holder system so a tablet can be used. Again, reference drone controller tablet holder designs as there are multiple examples. 3. Automatic-Control-Unit: will be a way for the asset protection system to automatically respond to a detected threat. For example, a system which is plugged into an outlet may be plugged into a outlet-style automatic-response-unit so that the device can be shut down if a threat is sensed by the system. Get creative here and propose a few different form factors for possible automatic-control-units. Please reference the attached Word Doc. For further documentation.

我们有兴趣雇用有经验或有能力为鞋类和鞋类相关项目创建CAD的人。

嗨！我们想请求您的帮助，为市场创造一个新的厨房准备站产品，将由竹子制成。具备这些元素的技术技能或经验将会有所帮助。我们正在寻找具有最佳功能的高品质设计。使用这个指南来设计一个独特的、超功能的、赏心悦目的产品。在设计比赛之后，我们想要验证我们的概念并将产品推向市场!可交付成果。所有的CAD图显示一切。请提供设计的每一面/元素的完整尺寸。此外，提供图像显示清楚的每一面的单位(顶部，底部，前面，后面，侧面。 3D files as well. And static images of all the different angles sent separately. Requirements: 1. We are looking for a very specific product. You can choose to use our EXACT details on HOW we would do it and provide the final details to make it work perfectly (and look nice, consider costs, etc). Possibly adding in some small changes or improvements. This is highly desirable to us. We like the current idea but need it fleshed out and the “Look/Details” finalized. See the description on what we were thinking. 2. You can also choose to make a more unique product based on the ideas presented. This could work but it will be more difficult to do exactly what we want. 3. The product must include a cutting board, food scale, food disposal area for items chopped on cutting board, and containers to put the food in. The idea of measuring the food is also good. Extra “cutting parts/blades” not really desired. We like the idea of an efficient cutting board where you use a knife. Please see the bottom on the specifics of the products we like and why. 4. Size: Flexible. Kitchen product. We recommend a cutting board of around 16 inches long and about 10 inches wide. This is a good starting point. The rest of the details please consider making the different elements big enough but also consider the costs as well. It should be an efficient/space saving product. Easy to be out of the way and not too bulky. 5. The item has to come FULLY Assembled. 6. The more versatility and uniqueness this product has the better. But simplicity, cost in manufacturing and shipping are also very important. 7. Material: Needs to be made of bamboo. All bamboo is ideal and recommended. Some metal and/or glass can also be included. No plastic except perhaps for the scale. 8. High quality and durability a priority. Materials that don’t crack or warp, etc. 9. MORE function is desired. Versatility and function is a huge part of our brand. More STORAGE space or ways to store. 10. It should look aesthetically pleasing in its design. People should look at it and go “that’s nice!”. 11. The deliverables should include full design in multiple angles for CAD drawings. As well as static images of all angles plus 3D files. See our attached file for Specifics.

嗨！我们想请您帮助我们为市场开发一种新的竹制笔筒/收纳器产品。具备这些元素的技术技能或经验将会有所帮助。我们正在寻找具有最佳功能的高品质设计。在附件中，您可以找到一些指导方针和一些示例图像的灵感。我们希望您使用本指南来设计一个独特，功能强大且外观美观的产品。在设计比赛之后，我们想要验证我们的概念，并将零食组织器投入生产!可交付成果。所有的CAD图显示一切。请提供设计的每一面/元素的完整尺寸。 Also, provide images showing clearly each side of the unit (top, bottom, front, back, sides.

你好设计师!CloudNC正在举办一场比赛，为CNC加工开瓶器制作CAD，我们可以在内部生产，并作为礼物分发给投资者、员工和访客。它应该是3轴可加工的(仅铣削)，设计用于制造(没有令人难以置信的紧密半径，例如或内角)，并且看起来很现代。你可以推荐一种材料。如果组装起来非常简单，可以使用多种零件/材料，例如使用标准的m螺纹螺钉。如果您有任何问题，请与我们联系。好运！