Hire Mechanical Engineer Designers near New York, United States

5+ years CAD DesignRead more

5+ years CAD Design

根据SMACHNA起草暖通施工图。As-Builts and Coordination drawings for commercial and residential NYC projects. Site-visits for project evaluation. • Coordination HVAC...Read more

根据SMACHNA起草暖通施工图。As-Builts and Coordination drawings for commercial and residential NYC projects. Site-visits for project evaluation. • Coordination HVAC design with other trades. • Design energy efficient HVAC systems in Autocad for residential andcommercial(stores,medical facilities,schools,offices) buildings in NYC also do Shop Drawings. •Coordinate HVAC design with other trades: plumbing,• sprinklers,RCP Review applicable design standard requirements, codes and regulations as they relate to the project according to ASHRAE or NYCECC. •Assist the Lead Mechanical Engineer on the development of Instrumentation and Control design for Mechanical systems. • Approve Shop Drawings. • Prepare plans,specifications,schedules,documentation. • Processing Comecheck and Energy Conservation codes. • Prepare as-built drawings.

I am a product design and development specialist with a background in Mechanical Engineering. I received my degree from Northeastern University in 2011 and, since then, have worked in the medical,...Read more

I am a product design and development specialist with a background in Mechanical Engineering. I received my degree from Northeastern University in 2011 and, since then, have worked in the medical, robotics, consumer electronics, process valve controller, and elevator device industries. With over 8 years of experience in the iterative product development process, I've gained the experience and skill set necessary - in 3D CAD, model creation, design for manufacturability and assembly, manufacturing expertise, prototyping, test development, project management, and supply chain management - to bring your ideas to life seamlessly and efficiently. No matter what - the scope/size of the project, product, or material - I can help you get it manufactured and into your hands quickly. There are no restrictions or requirements to my service, if you'd like for me to just create the design files then that's not a problem either. Please feel free to contact me with any inquiries. I'm looking forward to working with you. **Resume and design portfolio available upon request**

Hello! My name is Rius and I am entering my senior year studying Mechanical Engineering. I have been experienced with 2D and 3D modelling since I was in high school. I came across this site and...Read more

Hello! My name is Rius and I am entering my senior year studying Mechanical Engineering. I have been experienced with 2D and 3D modelling since I was in high school. I came across this site and thought it would be great to share my knowledge. As the saying goes, "If you're great at something, don't do it for free." Look forward to working with you!

I'm Richard L. Mohabir, an engineer specializing in mechanical and mechatronics projects. I hold an M.S. in Robotics Engineering and a B.S. in Mechanical Engineering from Worcester Polytechnic...Read more

I'm Richard L. Mohabir, an engineer specializing in mechanical and mechatronics projects. I hold an M.S. in Robotics Engineering and a B.S. in Mechanical Engineering from Worcester Polytechnic Institute (WPI). Throughout my career, I have worked on various notable projects, such as building an ignition circuit for aerospace experiments, designing the electrical circuit and mechanical enclosure for a motor system's control panel, and developing sheet metal jigs and weldment fixtures to streamline the deployment of robotics systems. I'm currently looking to take on new and exciting projects that I can work on in my spare time.

I am a grad student pursuing my Master's Degree in Mechanical Engineering at RPI. I have taken numerous design/CAD courses. I am experienced in data manipulation using MATLAB programming and...Read more

I am a grad student pursuing my Master's Degree in Mechanical Engineering at RPI. I have taken numerous design/CAD courses. I am experienced in data manipulation using MATLAB programming and Microsoft Excel. I have also shaped my communication skills having worked as a department store sales associate. I am eager to develop new skills and build upon old ones.

I am a hands on Mechanical Engineer with over twenty years of working experience. During my career, I developed solutions to problems in disciplines ranging from machine design, color science,...Read more

I am a hands on Mechanical Engineer with over twenty years of working experience. During my career, I developed solutions to problems in disciplines ranging from machine design, color science, lighting, structural design, robotics & chemistry. In my current position, I am a working manager using Pro/Engineer to develop home automation equipment and my engineering skills (kinematics, force analysis & dynamics) to make sure these products work “out of the box”.

I am a very motivated, hardworking individual with a passion in bringing people ideas to life. With knowledge in mechanical engineering and proficiency in mechanical design and analysis. I have the...Read more

I am a very motivated, hardworking individual with a passion in bringing people ideas to life. With knowledge in mechanical engineering and proficiency in mechanical design and analysis. I have the full capabilities to do so and much more. Taking napkin sketches ideas and turning them to final products. As an engineering student in a rapidly growing global economy, I am eloquent in prototyping services through freelance means. Generally, most students are strictly focused on academics, which is an excellent prospect. However, I am a true believer of the idea that is no better way to learn than to do. Please do not hesitate to reach out to me if you feel that my skills can apply to your business or personal needs.

I am a Mechanical engineer from New York specializing in the design and manufacture of precision aluminum, stainless steel, and plastic parts. 3D modelling in SolidWorks 2D engineering...Read more

I am a Mechanical engineer from New York specializing in the design and manufacture of precision aluminum, stainless steel, and plastic parts. 3D modelling in SolidWorks 2D engineering drawings Tolerancing to ASME Y14.5-2009 Design for manufacturing Feel free to message me directly to learn more about my capabilities or discuss a potential project! Please visit my LinkedIn for more detailed information regarding my work experience. (hidden)

我是一个工程师的广泛背景诺里居民区上空dge based on work experience. Starting my career in Aeronautical Engineering for almost two years developing skills in ProE designing, modeling...Read more

我是一个工程师的广泛背景诺里居民区上空dge based on work experience. Starting my career in Aeronautical Engineering for almost two years developing skills in ProE designing, modeling and testing of materials and their implementation. Previous designs in the field of aerospace engineering include the design of a high pressure air system required to test a flight vehicle in high altitude conditions. The high pressure air system required pressure vessels to sustain the operation of the test, and were calculated to be too costly, however using recycled vessels were considered. The recycled vessels then needed to be tested before being put into service on the system. This meant cutting several critical failure sections of the pressure vessel and sending it for tensile, compression, modulus lab data. This data would then need to be scrutinized to the calculated data based on pressure vessel code and good design practice, safety factors etc. The delivery system was then modeled in ProE Creo software to be delivered to in-house machinists for material ordering and assembly, but not until modeled in AnSYS modeling comparison. This system was successfully commissioned by a engineering team effort with my design engineering assistance. Creating databases to clearly log product data, quality reports, team performance, and work load is also one of my skills using Microsoft Office Access. The custom code i wrote in VBA to easily track and print weekly data that would be discussed at design meetings in an effort to improve overall team efficiency. Using ProE to design flight vehicles for test models was also a key piece of experience to tune my design experience in fluid dynamics. As the design went from pencil and paper theoretical calculations, they were transformed into models, later tested by my team and then a full size model delivered to the customer, NASA, for field testing. Many points of aeronautical engineering experience resides in the modeling done in ProE Creo/Wildfire to develop testing models. My mechanical engineering design experience comes from a firm mostly pitched towards the development of public & private schools. We design the mechanical, HVAC, electrical, plumbing and fire protection, and civil systems. All of the engineering is done "in the same house" as the architectural design. My experience circumvents all of the engineering trades in accordance with NYS education code, the supplements, and the current IMC. Designing systems in my current atmosphere allow for the full design to be implemented without value engineering the design like an EPC. Though EPC's are also part of the job. Mechanically, I have designed HW/Steam boiler rooms, AHU systems, VRF, and the like. My fire protection experience stemmed from my family business, meaning i physically installed many types of plumbing systems and fire protection systems; it is a critical component to influence my design practice in HASS and/or AutoCAD. Many engineers call it "the third eye." My plumbing design experience resides in all types of waste and domestic systems for commercial kitchens, assisted living facilities, schools, large residences and small, also churches. As much as possible, I use my local contacts in the gas, electrical and water utilities to make my designs as solid as possible. All of my MEP & FPE design are based on maintaining code requirements while not having the customer pay for unnecessary equipment etc.

Mechanical Engineer. If you want me to send you any file from my gallery just ask for it.Read more

Mechanical Engineer. If you want me to send you any file from my gallery just ask for it.

动机和有经验的机械工程师proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics,...Read more

动机和有经验的机械工程师proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and heat transfer analysis.

I am a Mechanical Engineer with a B.S and M.S in Mechanical Engineering. I have extensive experience in the automotive world as well as the defense world.Read more

I am a Mechanical Engineer with a B.S and M.S in Mechanical Engineering. I have extensive experience in the automotive world as well as the defense world.

I'm a mechanical engineering student and part of a Baja SAE Motorsports team, where I work with other college students to design, fabricate, and build an off-road car every year. I was also...Read more

I'm a mechanical engineering student and part of a Baja SAE Motorsports team, where I work with other college students to design, fabricate, and build an off-road car every year. I was also previously part of a highschool robotics team. I have over five years of experience with SolidWorks and three years of experience with Fusion 360. I'm happy to create any CAD models and CAM files.

A bachelor in mechanical engineering from an ABET accredited university. From previous and current work experiences and academic experiences I have been tested on my skill in Solidworks, Autocad...Read more

A bachelor in mechanical engineering from an ABET accredited university. From previous and current work experiences and academic experiences I have been tested on my skill in Solidworks, Autocad Map 3D, Civil 3D, Inventor, and ANSYS. Because of this, I have completed projects for companies such as National grid and Avangrid.

Hi There! My name is Mike. I have 10+ years as a Mechanical Engineer and Industrial Designer in the product design and manufacturing industry. My experience spans areas of 3D Modeling, Product...Read more

Hi There! My name is Mike. I have 10+ years as a Mechanical Engineer and Industrial Designer in the product design and manufacturing industry. My experience spans areas of 3D Modeling, Product Design, Tool and Die design, Machine design, Rapid Prototyping, CNC and Machining, 3D Printing, Injection, and Compression molding, and much more. In addition, I have extensive project management experience, having managed multi-million dollar projects ranging from facility design and development, to company-wide overhauls of infrastructure and processes. If you are looking for someone to deliver results quickly and efficiently, who is easy to work with, and who will support you in your project, feel free to reach out!

I am a senior Mechanical Engineering Student. Through internships, I have gained experience molding anything from an aerospace part to a simple 3D-printed blockRead more

I am a senior Mechanical Engineering Student. Through internships, I have gained experience molding anything from an aerospace part to a simple 3D-printed block

I finished my education in master of mechanical engineering in 2014 from the University Technology Malaysia (UTM) with overall-score/Final-CGPA: (3.73/4). I have worked for more than 11 years in...Read more

I finished my education in master of mechanical engineering in 2014 from the University Technology Malaysia (UTM) with overall-score/Final-CGPA: (3.73/4). I have worked for more than 11 years in the field of mechanical engineering. Some of my duties in summary are : Working as project manager, Designing supervisor, Product Designer, injection Mold tooling designer, Control and production Fixture designer, Automatic production line designer, CNC Specialist, Mold Manufacturing process manager, Production process manager.

Professional mechanical engineer in designing on Solidworks of sheet metal products and molds, completed many projects in this field in reality, with high accuracy and professionalismRead more

Professional mechanical engineer in designing on Solidworks of sheet metal products and molds, completed many projects in this field in reality, with high accuracy and professionalism